phone  (937) 890-5197

Shopsmith Forums

%nbsp;

3 posts • Page 1 of 1

Something I don't see often

#255824 by robinson46176 » Sun Jan 13, 2019 4:43 pm

A clear workbench top...
I have two in the farm/mechanics shop that I have not seen the top of in a couple of decades. :eek: :rolleyes: :o
This is in the basement woodshop. I built this old bench long long ago from what ever I had on hand. At one time years ago it sat on a dirt floor a while and I had to repair the bottom a little. I have threatened many times to build a new bench from scratch but it has kind of become an old friend. I do want to make a couple of improvements to it and "freshen it up" a bit (another name for paint :) ). I made the vise in the foreground using an old vise screw I found "someplace" and I have a quick action vise mounted on the far end. I still usually keep using the old vise I made.
That's a heavy folding work table leaning against the front of the bench waiting for me to find a new spot for it. That's 1" rough sawn pine stacked on a couple of saw horses behind the bench. It's waiting on me to build a new mobile lumber rack for it and several other stacks of different species.

Woodshop - Clean benchtop.jpg
Woodshop - Clean benchtop.jpg (65.18 KiB) Viewed 1465 times



Woodshop - Beam me aboard Scotty.jpg
Woodshop - Beam me aboard Scotty.jpg (154.87 KiB) Viewed 1465 times



.

---

--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill

Post a reply  Reply with quote 

Re: Something I don't see often

#255984 by robinson46176 » Thu Jan 17, 2019 4:01 pm

4 days now and the bench top is still fully clear. Diana did lay her gloves on it when we were moving some firewood in but I made her move them. :D
The work table has been moved from its leaning spot in front of the bench to another spot where it is almost as much in the way as it was leaning on the bench. :rolleyes:
It's supposed to get pretty cold this weekend, down to minus 10 Sunday night. When it is down around zero there is no place I would rather work than in the basement woodshop with the wood burning furnace. Maybe I can get a few things done like building my mobile wood rack and move some stuff around "again".
Things are getting to the point now where even with too much irrelavent stuff in the shop area a little work actually shows progress. I even have some room now opening up where I can put some stuff to be removed "just for now" until I can get enough time in other buildings to make space for it there (when the temps get back into the 40's and 50's).



.

---

--

farmer

Francis Robinson

I did not equip with Shopsmiths in spite of the setups but because of them.

1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill

Post a reply  Reply with quote 

Re: Something I don't see often

#255990 by roy_okc » Thu Jan 17, 2019 6:16 pm

I had one of them thar clean workbenches once. For about 15 minutes while I finished it up.

---

Roy

Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Home designed and built CNC router, another CNC router :D desktop size
Laser engraver
Way too much other stuff and not enough space :rolleyes:

Post a reply  Reply with quote 

Who is online

Users browsing this forum: Bing [Bot] and 43 guests

Board indexDelete all board cookies

Welcome to Shopsmith. Please fill in this form and we'll send you more information about the Shopsmith MARK 7 and other woodworking topics.

Subscribe to our mailing list

* indicates required