phone  (937) 890-5197

Shopsmith Forums

%nbsp;

96 posts • Jump to page: 1 6 7 8 9 10

There is a motor, controller and misc. parts listed as original in box, never used for auction on eBay which ends Monday Oct. 8 at 3:40 PM PST
Current bid $56.00
10-08.jpg
10-08.jpg (253 KiB) Viewed 11326 times

I have a hand crank for the planers in what I believe is the original box which is marked with part number 505998. I do not have a planer manual old enough to confirm if it is a correct part number. Also this part number is no longer available.

---

Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters. Has Speed Changer, Model 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. On bench w/ metal ends & retractable casters.

Post a reply  Reply with quote 

I am very skeptical. Yes, it says "Original in box. never used" in one place but elsewhere in the ad it is described as used. If the motor runs this is probably a "STEAL" at $56 and especially if the offer includes everything in the photo image. The control box itself is worth that much. I have it on my watch list - just because I am very curious.

---

"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.

Post a reply  Reply with quote 

Has it been removed???

---

╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E(SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange

Post a reply  Reply with quote 

JPG wrote:Has it been removed???


No. It is still there as of 10/3/2018.

https://www.ebay.com/itm/Shopsmith-Plan ... Sw85Jbsp-U

---

"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.

Post a reply  Reply with quote 

There is still time to ask the seller if he/she has tried to plug it in and run the motor. If they have not they could try it to confirm it is in good working order. It should not hurt it to be run without being connected to a Planer.

---

Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters. Has Speed Changer, Model 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. On bench w/ metal ends & retractable casters.

Post a reply  Reply with quote 

So I know this thread is quite old by this point, but I stumbled upon it due to the fact that I currently have a VO3537AA80 feed motor with a broken brush holder and missing cap/brush. After digging through this thread, I realized I may be of help since, coincidentally, I live in Whittier, CA just off of Painter Ave. near Eurton Electric. I'll try to get in contact with them and bring them my feed motor, to see if I can get a definite answer on whether they have a matching brush holder or not!

Post a reply  Reply with quote 

Novasteve74 wrote:So I know this thread is quite old by this point, but I stumbled upon it due to the fact that I currently have a VO3537AA80 feed motor with a broken brush holder and missing cap/brush. After digging through this thread, I realized I may be of help since, coincidentally, I live in Whittier, CA just off of Painter Ave. near Eurton Electric. I'll try to get in contact with them and bring them my feed motor, to see if I can get a definite answer on whether they have a matching brush holder or not!


There is a thread here where we discussed this exact topic. The company that made the motor is still in business. Brushes, holders and caps are pretty standard. Do a search and you will find the thread with all the info you need.

---

John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT

Post a reply  Reply with quote 

Re: Can a 12" Planer w/o feed motor be converted to manual feed?

#263337 by BuckeyeDennis » Tue Oct 01, 2019 8:17 pm

jsburger wrote:
Novasteve74 wrote:So I know this thread is quite old by this point, but I stumbled upon it due to the fact that I currently have a VO3537AA80 feed motor with a broken brush holder and missing cap/brush. After digging through this thread, I realized I may be of help since, coincidentally, I live in Whittier, CA just off of Painter Ave. near Eurton Electric. I'll try to get in contact with them and bring them my feed motor, to see if I can get a definite answer on whether they have a matching brush holder or not!


There is a thread here where we discussed this exact topic. The company that made the motor is still in business. Brushes, holders and caps are pretty standard. Do a search and you will find the thread with all the info you need.


John, as near as I can tell this IS that thread. But I didn’t see a source for holders and caps.

Post a reply  Reply with quote 

BuckeyeDennis wrote:
jsburger wrote:
Novasteve74 wrote:So I know this thread is quite old by this point, but I stumbled upon it due to the fact that I currently have a VO3537AA80 feed motor with a broken brush holder and missing cap/brush. After digging through this thread, I realized I may be of help since, coincidentally, I live in Whittier, CA just off of Painter Ave. near Eurton Electric. I'll try to get in contact with them and bring them my feed motor, to see if I can get a definite answer on whether they have a matching brush holder or not!


There is a thread here where we discussed this exact topic. The company that made the motor is still in business. Brushes, holders and caps are pretty standard. Do a search and you will find the thread with all the info you need.


John, as near as I can tell this IS that thread. But I didn’t see a source for holders and caps.


Yes it is, sorry I didn't check. Again Vonwise is still making motors. Given that the brushes are standard I would think the caps and holders are also.

---

John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT

Post a reply  Reply with quote 

Re: Can a 12" Planer w/o feed motor be converted to manual feed?

#263381 by everettdavis » Wed Oct 02, 2019 11:44 pm

jsburger wrote:
BuckeyeDennis wrote:
jsburger wrote:
There is a thread here where we discussed this exact topic. The company that made the motor is still in business. Brushes, holders and caps are pretty standard. Do a search and you will find the thread with all the info you need.


John, as near as I can tell this IS that thread. But I didn’t see a source for holders and caps.


Yes it is, sorry I didn't check. Again Vonwise is still making motors. Given that the brushes are standard I would think the caps and holders are also.



Here is the link to the post within this thread I believe you are seeking

viewtopic.php?p=252073#p252073

Everett

Post a reply  Reply with quote 

Who is online

Users browsing this forum: No registered users and 150 guests

Board indexDelete all board cookies

Welcome to Shopsmith. Please fill in this form and we'll send you more information and special offers for the Shopsmith MARK 7 and other woodworking topics.

Subscribe to our mailing list

* indicates required
cron