Shopsmith Forums

skip the 510, go with the 520 or incra depending on your budget.

red

Hello airforcesxs, my first thought before i got to the part about sparks, i thought the speed changer had been left on high which was tripping the circuit becuse of the additional load. i agree with bucksaw probably a short where the wire goes into the headstock.

red

John,
thanks for the information, now i have another useful project build

RP:)

I felt my band saw was making too much noise so I greased the bearings. And it was a little better. But still made a lot of noise so I greased the bearings again and adjusted all the roller and guides per the manual and now I am satisfied its in good working condition.

RP

John, I think your router/lathe is great and I am thinking of building one myself. Where did you get your crank/drive mechanism? or did you build it yourself? what type of bits do you typically use? square and round nose, anything else? How did you do the tapered bottle stopper?

RP

Mr. Folkerth
this is great. can we add a spell ckecker to the text tools.

R

i did an ebay search for cherry plywood and found 4'x8'x1/4" and 3/4" going for 22 and 40 dollars respectfully and as little as 15 dollars shipping. woodshop in Hazelwood, Missouri I personally search for exotic wood ebay. http://cgi.ebay.com/Cherry-Plywood-1-PC-3-4-X-24-X48_W0QQitemZ82856...