Search found 240 matches
- Wed Oct 18, 2006 6:40 pm
- Forum: Beginning Woodworking
- Topic: Half-Lap Joints in long stock
- Replies: 7
- Views: 31002
Other suggestions
One of the wonderful things about woodworking is that there are many ways to solve the same problem. While sleds are a good idea and I had never thought of using the top of my fence as a narrow table (thanks!), here are some ways I've attacked half laps in long 2 x 4 stock. 1. I've used my radial ar...
- Tue Oct 10, 2006 6:46 pm
- Forum: General Woodworking
- Topic: wood joint strength test
- Replies: 6
- Views: 30808
Setup time for SS mortiser
No, I've never used a standalone mortiser. The setup time for the SS mortiser is not too bad once you have the SS in the drill press positiion. The SS mortiser attaches to the SS like the saw guard. It does require a non standard allen wrench. The standard drill chuck goes inside the attachment. On ...
- Tue Oct 10, 2006 11:15 am
- Forum: General Woodworking
- Topic: wood joint strength test
- Replies: 6
- Views: 30808
M & T made easy
I use all three; biscuits, pocket screws and Mortise and Tendon joints depending on the application. Just to throw in another ringer, I use contrasting colored splines on mitered joints like picture frames, athough I'll be the first to admit that sometimes it's just showing off! My answer to the age...
- Mon Aug 21, 2006 9:49 pm
- Forum: Woodworking Tool Review
- Topic: Outfeed/Infeed Tables
- Replies: 40
- Views: 49175
Support tables
Yes, they are slick!!
- Fri Aug 11, 2006 5:34 pm
- Forum: Woodworking Tool Review
- Topic: Outfeed/Infeed Tables
- Replies: 40
- Views: 49175
I couldn't find it
I went to ebay and cut and pasted "Plan for Outfeed Infeed Adjustable Work Table" into the home page search box and didn't find it.
What am I doing wrong?
What am I doing wrong?
- Thu Aug 03, 2006 9:34 am
- Forum: General Woodworking
- Topic: Router Arm users or even owners?
- Replies: 4
- Views: 22533
I have one too!
I believe the arm was made by Bradley and sold under the shopsmith name. I too have upgraded the table to allow a router to be mounted below as well as above. I did this as a space saver so I only need one table. Shopsmith used to publish a number of plans using the pin router feature. My favorite i...
- Sat Jul 22, 2006 8:23 am
- Forum: General Woodworking
- Topic: What goes on in your shop?
- Replies: 43
- Views: 24813
OK, you asked!
OK, you asked! Dad owned a furniture store and bought at '54 model Shopsmith in "57. We used it to repair furniture parts and general stuff. Now, there is always someone who needs a cabinet, a bookcase, a picture frame or something. It seems like some is always having a craft fair and wants som...
- Fri Jul 21, 2006 9:48 am
- Forum: General Woodworking
- Topic: Storage for ShopSmith tables
- Replies: 17
- Views: 56924
Great suggestions
All great suggestions. Thanks! I'm a little short on wall space close to the ShopSmith. I think I'll take woodburners idea and apply it to a cart with slanted sides. Maybe I can store tables on one side, my jointer and belt sander on the other side and use the ends for turning stuff. Has anyone desi...
- Thu Jul 20, 2006 1:16 pm
- Forum: General Woodworking
- Topic: Sealing/Filling End Grain
- Replies: 4
- Views: 21588
Sand end with one grit finer
The time honored solution is to sand end grain one grit more, i.e. with red oak, sand the main pieces to 220 and the end grain to 300 or 320.
I've also read that you can put a wash coat of very thin shellac to seal the end grain, but I've personally never done this.
I've also read that you can put a wash coat of very thin shellac to seal the end grain, but I've personally never done this.
- Thu Jul 20, 2006 1:10 pm
- Forum: General Woodworking
- Topic: Storage for ShopSmith tables
- Replies: 17
- Views: 56924
Storage for ShopSmith tables
I've converted by old (1954) 500 to a 520. Has anyone designed a storage system for keeping all the expansion tables when using the ShopSmith as a lathe or drill press?