I am starting to do some research on a 10er. My problem is I do not know enough if one is complete or not. Are there any links on the web that may show each part to a 10er. I would like to get one to restore. Here are some pics on one I found on the web. Not interested in this one at this time but just from a learning standpoint what do you see or not see in this unit?
Used 10 er and parts
Moderators: HopefulSSer, admin
- cincinnati
- Platinum Member
- Posts: 1172
- Joined: Sun Apr 15, 2007 6:40 pm
- Location: Cincinnati, Ohio
-
- Bronze Member
- Posts: 3
- Joined: Mon Nov 27, 2006 8:24 pm
10er contacts
The person you need to contact is Bill Mayo. He is very knowlegdable about all s/s machines and there care and repair and their market values.
Also there is another contact-- Skip Campbell @ MKCtools.com he is located in Fort Worth, Texas.
I have personally done business with Bill Mayo and found him to be dealer in parts and spts.
Good luck it iooks like you have your work cut out for you.
Regards-Butcherboy--- in Ne.
Also there is another contact-- Skip Campbell @ MKCtools.com he is located in Fort Worth, Texas.
I have personally done business with Bill Mayo and found him to be dealer in parts and spts.
Good luck it iooks like you have your work cut out for you.
Regards-Butcherboy--- in Ne.
- wlhayesmfs
- Platinum Member
- Posts: 667
- Joined: Fri Jul 21, 2006 10:50 am
- Location: Broken Arrow OK
ER it is worth it.
I hope to up load some pictures of the ER I finished a couple of months ago. It is well worth the time and effort
Good luck[ATTACH]1968[/ATTACH]
[ATTACH]1969[/ATTACH]
Good luck[ATTACH]1968[/ATTACH]
[ATTACH]1969[/ATTACH]
- Attachments
-
- 78509-2.jpg (71.78 KiB) Viewed 22246 times
-
- DSCF1307.JPG (72.75 KiB) Viewed 22243 times
Bill
Broken Arrow OK
MKV, 510, MKVll, 50th Anniversary 520 with Jointech saw train, Bandsaw, scroll saw, joiner, 6" Sander,Stand Alone Pin Router and Router Table, Strip Sander, Jigsaw & (4) ER's plus Jigsaw for ER. DC SS RAS
Broken Arrow OK
MKV, 510, MKVll, 50th Anniversary 520 with Jointech saw train, Bandsaw, scroll saw, joiner, 6" Sander,Stand Alone Pin Router and Router Table, Strip Sander, Jigsaw & (4) ER's plus Jigsaw for ER. DC SS RAS
Hi I just got a shopsmith 10er too. I found the manual was very usefull and had a list of all the things that came with the shopsmith in the box as well as some attachments. Here is a link to it : http://www.songofthegreatlakes.com/ss10ermanual.htm
Hope you found it usefull.
Hope you found it usefull.