scroll saw
Moderators: HopefulSSer, admin
scroll saw
I bought a scroll saw today and I need to know if the power coupler hooks up to the top hub or the bottom hub on my 500 headstock. Thanks Ivan
Order a manual
Untill you can order a manual from Shopsmith, you might want to review one of Shopsmith's sites:
http://www.woodworkingscrollsaw.com/page2.htm
There are tips and photos there that will help you.
Al B
http://www.woodworkingscrollsaw.com/page2.htm
There are tips and photos there that will help you.
Al B
Al B
Shopsmith Greenie (my late Dad's); My 520, 6" Belt Sander, Bandsaw, Jointer, pro planer, scroll saw, Jig saw, strip sander, router table, OPR, dust collector, power station, & power stands
Shopsmith Greenie (my late Dad's); My 520, 6" Belt Sander, Bandsaw, Jointer, pro planer, scroll saw, Jig saw, strip sander, router table, OPR, dust collector, power station, & power stands
- woodburner
- Gold Member
- Posts: 498
- Joined: Fri Jul 21, 2006 2:35 am
- Location: Visalia, CA
- Contact:
Are you referring to the newer scoll saw or the older model which is no longer made?
If you are writing about the newer scroll saw, it attaches to the lower drive hub on the headstock. If you are referring to the older-style scroll saw, it is driven by the top drive hub on the headstock.
The newer scroll saw and jointer are the only two SPT's Shopsmith makes right now that run off the lower hub. The lower hub's RPM's are too fast for any of the other SPTs. Hope this helps.
If you are writing about the newer scroll saw, it attaches to the lower drive hub on the headstock. If you are referring to the older-style scroll saw, it is driven by the top drive hub on the headstock.
The newer scroll saw and jointer are the only two SPT's Shopsmith makes right now that run off the lower hub. The lower hub's RPM's are too fast for any of the other SPTs. Hope this helps.
Sawdust & Shavings,
Woodburner:o
Woodburner:o