Shaper Fence
Moderators: HopefulSSer, admin
-
- Bronze Member
- Posts: 2
- Joined: Mon Jan 14, 2019 11:54 am
Shaper Fence
I am missing the hold down bolts for my over table shaper fence. I don't seem to see the fence in the service parts section. Any help would be appreciated.
- dusty
- Platinum Member
- Posts: 21368
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Shaper Fence
454475 - the cap screw
120394 - flat washer
515110 - 3/8 - 16 nut
This data is applicable to the 510 shaper fence. Hope you don't have a 500.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- chapmanruss
- Platinum Member
- Posts: 3480
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Shaper Fence
If you need the parts Dusty listed for the 510/520 Shaper Fence they are common hardware parts and should be able to be found locally and cheaper.
If you need the parts for the 500 Shaper Fence they are
Clamp P/N 5130789 $13.64 (not sure if this is each or a pair so a call to Shopsmith would needed)
Clamp Screw P/N 426370 $3.95 each
Washer P/N 120394 $3.95 each
The Clamp screw is an Allen Wrench Cap Screw and a plain washer. I recommend getting the Clamps and buying the washers and cap screws locally. Shopsmith's minimum price for parts is $3.95 to help cover their costs of getting, stocking and handling of parts.
Sorry I do not know the size of the washer and cap screw but if needed I can get it. My 500 Shaper fence is stored. I believe they are 3/8"-16 since the washers are the same for the 500 and 510/520.
If you need the parts for the 500 Shaper Fence they are
Clamp P/N 5130789 $13.64 (not sure if this is each or a pair so a call to Shopsmith would needed)
Clamp Screw P/N 426370 $3.95 each
Washer P/N 120394 $3.95 each
The Clamp screw is an Allen Wrench Cap Screw and a plain washer. I recommend getting the Clamps and buying the washers and cap screws locally. Shopsmith's minimum price for parts is $3.95 to help cover their costs of getting, stocking and handling of parts.
Sorry I do not know the size of the washer and cap screw but if needed I can get it. My 500 Shaper fence is stored. I believe they are 3/8"-16 since the washers are the same for the 500 and 510/520.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
-
- Bronze Member
- Posts: 2
- Joined: Mon Jan 14, 2019 11:54 am
Re: Shaper Fence
Thanks guys, if is a 510 fence and this is exactly what I needed