Dealing with Twist
Moderators: HopefulSSer, admin
Re: Dealing with Twist
jointer ?or use a hand or electric hand plane ? reference line on each side using a straight edge and square , ya probably don't need to take off that much ? then use the planer ? just a thought
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: Dealing with Twist
A planer will not straighten a twisted piece of stock. That is unless you mean a hand plane. The proper power tool to flatten a board is a jointer. Then run it through a planer to get two parallel faces of the proper thickness.garys wrote:If you have enough thickness of wood to plane them until they are perfectly straight, my only other option seems to be to use them as firewood.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Dealing with Twist
jsburger wrote:A planer will not straighten a twisted piece of stock. That is unless you mean a hand plane. The proper power tool to flatten a board is a jointer. Then run it through a planer to get two parallel faces of the proper thickness.garys wrote:If you have enough thickness of wood to plane them until they are perfectly straight, my only other option seems to be to use them as firewood.
==========
+1
only question I may have is,,, what provisions can you make to stop it from reoccurring over time ?
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: Dealing with Twist
Probably nothing. Quarter sawn is the best answer and works very well. It was made by God and mother nature does what she wants. Man continues to challenge mother nature and eventually always looses.Hobbyman2 wrote:jsburger wrote:A planer will not straighten a twisted piece of stock. That is unless you mean a hand plane. The proper power tool to flatten a board is a jointer. Then run it through a planer to get two parallel faces of the proper thickness.garys wrote:If you have enough thickness of wood to plane them until they are perfectly straight, my only other option seems to be to use them as firewood.
==========
+1
only question I may have is,,, what provisions can you make to stop it from reoccurring over time ?
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Dealing with Twist
LOL true ,, but sometimes,,,, losing isn't all ways a bad thing , it comes with a learning curve ?
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)