First Project- Critique
Moderators: HopefulSSer, admin
First Project- Critique
Hey all-
Here is my first completed project-it gave me some exposure to various tools on the SS I recently purchased and was overall a good learning experience. I'd like your critical input on the result.
The wife had brought some German breakfast boards with her when she moved over and they have been with us for 20 years. They served us well but we broke one or two, and it was time for a replacement.
I got a block of curly maple which was resawn down, table sawed to size, sanded for a couple days, finally burnishing and sealed.
i think the result is pretty good-the "curly" 3D wave in this wood is really neat to see-then run your hand over and find no wave at all.
I had some leftover material, so made a bunch of drink coasters as well.
Regards,
b
Here is my first completed project-it gave me some exposure to various tools on the SS I recently purchased and was overall a good learning experience. I'd like your critical input on the result.
The wife had brought some German breakfast boards with her when she moved over and they have been with us for 20 years. They served us well but we broke one or two, and it was time for a replacement.
I got a block of curly maple which was resawn down, table sawed to size, sanded for a couple days, finally burnishing and sealed.
i think the result is pretty good-the "curly" 3D wave in this wood is really neat to see-then run your hand over and find no wave at all.
I had some leftover material, so made a bunch of drink coasters as well.
Regards,
b
Re: First Project- Critique
You did good. That's some gorgeous maple.
- rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: First Project- Critique
Outstanding work and beautiful wood!
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Re: First Project- Critique
Any thoughts on the water proofness of a linseed oil+ honey mix ?
I'm looking for a food safe coating that can hold off a bit of water/rinsing once in awhile.
The only thing I've come up with is Shellac so far.
thanks,
b
I'm looking for a food safe coating that can hold off a bit of water/rinsing once in awhile.
The only thing I've come up with is Shellac so far.
thanks,
b
- JPG
- Platinum Member
- Posts: 34655
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: First Project- Critique
I am not sure what the honey brings to the goal.
BLO is very good at resisting moisture when 'refreshed' often.
OH those are drop dead gorgeous.
Now tell us how they are to be used.
BLO is very good at resisting moisture when 'refreshed' often.
OH those are drop dead gorgeous.
Now tell us how they are to be used.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: First Project- Critique
Oh sorry not honey haha-its beeswax - I used Tried and True -link here.
https://www.triedandtruewoodfinish.com/ ... od-finish/
I know them as "German breakfast boards"...though I think they have numerous names.
They are simply a plate replacement for breads/cheeses/deli meats . They are prevalent in Germany though I've run into them in other European countries as well.
At first when the wife brought them out, I was skeptical- but actually now I like them...why ? I don't know-something different in the day-to-day I guess.
Heres a better description I think.
https://germangirlinamerica.com/where-t ... abendbrot/
b
https://www.triedandtruewoodfinish.com/ ... od-finish/
I know them as "German breakfast boards"...though I think they have numerous names.
They are simply a plate replacement for breads/cheeses/deli meats . They are prevalent in Germany though I've run into them in other European countries as well.
At first when the wife brought them out, I was skeptical- but actually now I like them...why ? I don't know-something different in the day-to-day I guess.
Heres a better description I think.
https://germangirlinamerica.com/where-t ... abendbrot/
b
Re: First Project- Critique
Nice job
Are you planning on any engraving around the edges?
I wouldn't rule out a butcher block / cutting board oil /tong oil / danish oil ? I use olive oil on our cutting boards.
Are you planning on any engraving around the edges?
I wouldn't rule out a butcher block / cutting board oil /tong oil / danish oil ? I use olive oil on our cutting boards.
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: First Project- Critique
The wife wants me to burn the date/initials into them...but I tend toward the clean look.
I don't have an engraving tool, but I like that idea better than using a soldering iron to burn the nice wood.
I will look into this though !
I don't have an engraving tool, but I like that idea better than using a soldering iron to burn the nice wood.
I will look into this though !
- JPG
- Platinum Member
- Posts: 34655
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: First Project- Critique
The edges are available for personalization etc..
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: First Project- Critique
Nice job, and beautiful wood.
I just use plain USP mineral oil from the drug store. It's cheap, safe and easy to reapply a few times a year. You don't want anything that builds a film - that will just flake off into your food when you use a knife.
I just use plain USP mineral oil from the drug store. It's cheap, safe and easy to reapply a few times a year. You don't want anything that builds a film - that will just flake off into your food when you use a knife.