Drill Bit Sharpening
Moderators: HopefulSSer, admin
Drill Bit Sharpening
Today I mounted one of those drill bit sharpening rigs onto the table of the Shopsmith by drilling 2 1/4" holes.
I put them in the center and in line with the chuck -- could have offset them too I suppose.
I put one of those 8" thin stones in the chuck, but it seems to me it is too coarse a grit for bits.
That big sanding disk that came with has some nice emery glued to it.
Would be a nice finishing touch to the first cutback.
Sorry, I'll go take a photo now for your entertainment.
Wait!
If One picture is worth a thousand words
Why did I write this letter
TT
I put them in the center and in line with the chuck -- could have offset them too I suppose.
I put one of those 8" thin stones in the chuck, but it seems to me it is too coarse a grit for bits.
That big sanding disk that came with has some nice emery glued to it.
Would be a nice finishing touch to the first cutback.
Sorry, I'll go take a photo now for your entertainment.
Wait!
If One picture is worth a thousand words
Why did I write this letter
TT
Re: Drill Bit Sharpening
I give up! What a hassle trying to get the photo small enough to attach.
Other forums are a breeze.
Other forums are a breeze.
Re: Drill Bit Sharpening
Hi and welcome
I do my drill bit sharpening on a Drill Doctor. I have the original model and it puts a superior edge on conventional twist drill bits. All of the other do-dads left an inferior edge and/or angle.
Bill V
I do my drill bit sharpening on a Drill Doctor. I have the original model and it puts a superior edge on conventional twist drill bits. All of the other do-dads left an inferior edge and/or angle.
Bill V
- JPG
- Platinum Member
- Posts: 34647
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Drill Bit Sharpening
Just about any fine grit 12" sanding disk will do.TooTall wrote:Sharpener Mt'd_3.jpg
NICE looking 10E!!!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Drill Bit Sharpening
Thanks!
My browser keeps crashing when I try to reply.
My Smith came with emery cloth glued to the big sanding disk.
I'll have to try that.
It's an insult to call this a do-dad as though it's not much more than a gimmick. I almost sprung for a Drill Doctor but for under $30 I thought I'd give this a shot after watching a few videos.
There's a bit of an art to using this jig with success I'm thinking -- as opposed to plug-and-play for dummies.
Cheers,
T
My browser keeps crashing when I try to reply.
My Smith came with emery cloth glued to the big sanding disk.
I'll have to try that.
It's an insult to call this a do-dad as though it's not much more than a gimmick. I almost sprung for a Drill Doctor but for under $30 I thought I'd give this a shot after watching a few videos.
There's a bit of an art to using this jig with success I'm thinking -- as opposed to plug-and-play for dummies.
Cheers,
T
Re: Drill Bit Sharpening
How do you sharpen brad point bits?
Re: Drill Bit Sharpening
Don't know what a Brad Point is.
-
- Platinum Member
- Posts: 788
- Joined: Sat Aug 08, 2015 11:23 am
- Location: Marion, Iowa
Re: Drill Bit Sharpening
I have not needed to sharpen mine yet but I would guess a file or sharpening stone possibly even a dremel tool would work. It would have to be small enough to fit between the spur and center point. It may even be possible to make a sand paper paddle to fit the bit. If using sand paper, I would use 350 grit or higher the same as if you were sharpening a chisel or plane iron.
Brenda
1998 510 upgraded to a 520, upgraded to power pro with double tilt and lift assist.
1998 bandsaw
2016 beltsander
jointer
overarm pin router
1998 510 upgraded to a 520, upgraded to power pro with double tilt and lift assist.
1998 bandsaw
2016 beltsander
jointer
overarm pin router
Re: Drill Bit Sharpening
I think an auger bit file would be the way to go.ryanbp01 wrote:How do you sharpen brad point bits?
http://www.leevalley.com/us/wood/page.a ... 3089,70693
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,