Chapmanruss,
Yes, I think it is a 1963 pulled it from a fire recuse, Model 700000 Ser# 717920
Do you have 505512? do you have any sources for the Arbor?
Also look for the L.H. spindle-nut (4864)
Arbors
Moderators: HopefulSSer, admin
Re: Arbors
- Attachments
-
- KIMG2605.jpeg (342.19 KiB) Viewed 6079 times
- chapmanruss
- Platinum Member
- Posts: 3481
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Arbors
If I would have turned the arbors over for the picture it says "Out for Left Spindle" on the other side. It's the same arbor for either side of the power head just keep the proper side out. That helps keep the nut from loosening as the spindle is turning against it. They come up for sale on ebay but rarely. Remember there were only 25,406 SawSmith Radial Arm Saws sold during the 10 years they were in production. Since yours was made by Magna American it would be 1963 or later.
.
.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
-
- Gold Member
- Posts: 182
- Joined: Thu Mar 29, 2018 6:52 pm
- Location: New Carlilse, Oh
Re: Arbors
Nipper, I have two Sawsmith arbors I could get rid of, if you are still looking for some. Both are 1 1/2".
- Attachments
-
- Arbor 1.jpg (59.21 KiB) Viewed 6051 times
-
- Arbor 2.jpg (77.45 KiB) Viewed 6051 times
- chapmanruss
- Platinum Member
- Posts: 3481
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Arbors
Wiley,
Don't you mean both are for 1-1/4" Arbor Hole Blades?
Don't you mean both are for 1-1/4" Arbor Hole Blades?
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
-
- Gold Member
- Posts: 182
- Joined: Thu Mar 29, 2018 6:52 pm
- Location: New Carlilse, Oh
Re: Arbors
Russ, Thanks for correcting me. Yes, they are 1 1/4.