Smithy Super Shop FM 73500
Moderators: HopefulSSer, admin
Re: Smithy Super Shop FM 73500
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
-
- Silver Member
- Posts: 11
- Joined: Sat Aug 10, 2019 12:55 pm
Re: Smithy Super Shop FM 73500
More you tubes under Smithy to figure out powering my SS band saw
Re: Smithy Super Shop FM 73500
[youtube]https://www.youtube.com/watch?v=QhjWdrlSBok[/youtube]KilnBilly777 wrote:More you tubes under Smithy to figure out powering my SS band saw
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Re: Smithy Super Shop FM 73500
These videos should help on how the Bandsaw blade tracks on the wheel.
[youtube]https://www.youtube.com/watch?v=7BKd4JtkxNM[/youtube]
[youtube]https://www.youtube.com/watch?v=BRN6CVvqBW0[/youtube]
[youtube]https://www.youtube.com/watch?v=7BKd4JtkxNM[/youtube]
[youtube]https://www.youtube.com/watch?v=BRN6CVvqBW0[/youtube]
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Re: Smithy Super Shop FM 73500
Page 18 of the manual says that all accessories are powered from the lower left shaft, not the draw bar, but doesn't say how to address the height dependency.
Re the coupler, note that hub that goes on the headstock will have four (4) grooves, this will mate with the end of the coupler that has the spring. the two loose hubs in the video go on the accessory (bandsaw) and have five (5) grooves.
Does the hub that is mounted on the lower left coupler have a 5/8" hole and a setscrew?
You could try mounting the bandsaw on the right end where the tailstock normally goes, and put the drive hub on the spindle in place of the saw arbor. Reverse the motor rotation so the blade turns in the correct direction.
Re the coupler, note that hub that goes on the headstock will have four (4) grooves, this will mate with the end of the coupler that has the spring. the two loose hubs in the video go on the accessory (bandsaw) and have five (5) grooves.
Does the hub that is mounted on the lower left coupler have a 5/8" hole and a setscrew?
You could try mounting the bandsaw on the right end where the tailstock normally goes, and put the drive hub on the spindle in place of the saw arbor. Reverse the motor rotation so the blade turns in the correct direction.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
-
- Silver Member
- Posts: 11
- Joined: Sat Aug 10, 2019 12:55 pm
Re: Smithy Super Shop FM 73500
Two things Learned. Remove The Draw Bar And The Couple To The Bandsaw attaches Perfectly.
Next, The Blade On The Band saw Need Not Be Centered. It Rides Better To The Back. Meant That Way.
Steve
Next, The Blade On The Band saw Need Not Be Centered. It Rides Better To The Back. Meant That Way.
Steve
-
- Silver Member
- Posts: 11
- Joined: Sat Aug 10, 2019 12:55 pm
Re: Smithy Super Shop FM 73500
The SS bandsaw blade runs to the rear, not centered. A new blade also was the trick. Really fun.
Re: Smithy Super Shop FM 73500
I am trying to find a self aligning wood chuck, anybody know of one that fits the super shop?
Also Pennview, what/how were the changes made for the tool rest?
seafish1951@gmail.com
Also Pennview, what/how were the changes made for the tool rest?
seafish1951@gmail.com
Re: Smithy Super Shop FM 73500
Pennview posted this earlier: " The spindle also has a male thread of 2 1/4" x 8 TPI so you can mount metalworking chucks and faceplates and take advantage of the hollow spindle. I've got a 6" three jaw chuck and 10" faceplate that fits the spindle. You also can get an R8/ER25 collet set. In essence, whatever you can mount on a Bridgeport, you can mount on the SuperShop."
Here is a link to a 2 1/4"-8 tpi faceplate you can attach a 3 or 4jaw chucks to:
https://www.google.com/url?sa=t&rct=j&q ... WF6tCoRcoh
Here is a link to a 2 1/4"-8 tpi faceplate you can attach a 3 or 4jaw chucks to:
https://www.google.com/url?sa=t&rct=j&q ... WF6tCoRcoh
SS Mark VII(sn 405025), SSband saw, SS 4" jointer, Older SS Mark V w/DC treadmill motor,
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer