Shopsmith Forums

shipwright wrote:Interesting thread. I couldn't help noticing the second post. (Thanks for the recognition Ron)
He mentions having seen a post or two on YouTube. I guess this may have been one of them.
https://youtu.be/Lf2qfOm6bDg (Sorry, can't find the embed code on my iPad)

When writing a post, the embed code for youtube is on the far right of the line under the subject line (same line with font etc.)

Yes, first thing I thought when I saw this was that he had basically watched your drum sander video and made a poor copy of it.

Thanks Al. I was looking for the embed code on YouTube. They don't seem to give them anymore (at least on iPad).

rpd wrote:A 10ER dedicated drill press with a treadmill motor and hospital bed motor to raise and lower the table.

Nice information Ron! Thanks for sharing with us!!!

Mike

roopurt5 wrote:Ha ha! That's my channel!

Cool

Trying out a "scary", wobble, dado blade.
[youtube]https://www.youtube.com/watch?v=jTVFDQAWBp8[/youtube]

Removing varnish from molding with the Shopsmith planer, (faces)
[youtube]https://www.youtube.com/watch?v=3MbbprBcg0o[/youtube]
and molder, (edges)
[youtube]https://www.youtube.com/watch?v=_kEdAIwgPVU[/youtube]

rpd wrote:Removing varnish from molding with the Shopsmith planer, (faces)
[youtube]https://www.youtube.com/watch?v=3MbbprBcg0o[/youtube]
and molder, (edges)
[youtube]https://www.youtube.com/watch?v=_kEdAIwgPVU[/youtube]

These should be followed with: Sharpening planer blades with the Shopsmith conical disc and sharpening guide and sharpening molding knives on a stone.

While I'm sure it worked, you are really going to dull your blades/inserts this way.

algale wrote:

rpd wrote:Removing varnish from molding with the Shopsmith planer, (faces)
[youtube]https://www.youtube.com/watch?v=3MbbprBcg0o[/youtube]
and molder, (edges)
[youtube]https://www.youtube.com/watch?v=_kEdAIwgPVU[/youtube]

These should be followed with: Sharpening planer blades with the Shopsmith conical disc and sharpening guide and sharpening molding knives on a stone.

While I'm sure it worked, you are really going to dull your blades/inserts this way.

That is the first thing I thought when watching it.

Turning duck calls.
[youtube]https://www.youtube.com/watch?v=F0MJS9jMFOA[/youtube]

[youtube]https://www.youtube.com/watch?v=ewNLebMuHWc[/youtube]