bandsaw guide block

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderators: HopefulSSer, admin

Post Reply
jjj240
Gold Member
Posts: 67
Joined: Mon Mar 20, 2017 6:54 pm
Location: So. Cal.

bandsaw guide block

Post by jjj240 »

I just acquired an used ss bandsaw.
Is the attached picture default steel guide block?
i've read cool block could be a potential improvement in longer blade life and less noise.
Is it worthy upgrading?
feedback on cool block vs ceramic block would be appreciated as well.
Attachments
r_IMG_20170811_061852.jpg
r_IMG_20170811_061852.jpg (118.19 KiB) Viewed 11230 times
Top
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Re: bandsaw guide block

Post by charlese »

jjj240 wrote:I just acquired an used ss bandsaw.
Is the attached picture default steel guide block?
i've read cool block could be a potential improvement in longer blade life and less noise.
Is it worthy upgrading?
feedback on cool block vs ceramic block would be appreciated as well.
Yes! especially for smaller saw blades. I use them always for 1/4" blades. Even when used for 1/2" blades, I close them onto the blade and let them rub for an even cut.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Top
GoNavy
Gold Member
Posts: 153
Joined: Fri Sep 02, 2016 8:16 pm
Location: Arkansas

Re: bandsaw guide block

Post by GoNavy »

Absolutely cool blocks are the best upgrade and relatively cheapest upgrade you can make on a SS bandsaw. Haven't once regreted changing over mine. Also dependent on how old your SS bandsaw is, upgrading the Guide Column Bracket (page 2 item 70 on parts guide) for the rod guard (the rod that goes up/down holding the cool blocks) greatly improves the side to side slack. Old retainer lacked an adjustment for side to side tension, over time wear causes a lot of movement, the newer retainer has a nylon screw (item 65) that takes out the slack and can be adjusted as wear occurs, for $12.63 this a no brainer upgrade. Best way to check is open up your saw and look to see if the guide rod retainer has a nylon screw


http://www.shopsmith.com/ownersite/manuals/845541.pdf

.
Top
masonsailor2
Platinum Member
Posts: 1564
Joined: Wed Feb 05, 2014 11:57 am
Location: Las Vegas NV

Re: bandsaw guide block

Post by masonsailor2 »

Agree with all comments. The cool blocks are a vast improvement.
Paul
Top
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Re: bandsaw guide block

Post by reible »

They cost a bit more, well a lot more but I'm a fan of ceramic. I've owned a bandsaw since the early 1970's (not a shopsmith) and I've used several different guide blocks but I've been most happy with the ceramic. I also have a set of the cool blocks for very narrow blades.

If you are interested there are several modifications that can be made to make the band saw better. Here is a link to a post on that subject:

http://www.shopsmith.com/ss_forum/maint ... t8361.html

It is a rather long read but there are a number of changes noted that I have done to my shopsmith saw.

Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Top
User avatar
JPG
Platinum Member
Posts: 34643
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: bandsaw guide block

Post by JPG »

I like 'blocks' made from lignum vitae.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
jsburger
Platinum Member
Posts: 6410
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: bandsaw guide block

Post by jsburger »

JPG wrote:I like 'blocks' made from lignum vitae.
Yeh, but where can one get Lignum Vitae these days. :)
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Top
User avatar
rpd
Platinum Member
Posts: 3045
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: bandsaw guide block

Post by rpd »

jsburger wrote:
JPG wrote:I like 'blocks' made from lignum vitae.
Yeh, but where can one get Lignum Vitae these days. :)
On one of the forums I subscribe to, can't find it right now, some one recently posted a mallet head that they had turned from Lignum Vitae, they had reclaimed it from an old lawn bowling ball. :)
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Top
User avatar
jsburger
Platinum Member
Posts: 6410
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: bandsaw guide block

Post by jsburger »

rpd wrote:
jsburger wrote:
JPG wrote:I like 'blocks' made from lignum vitae.
Yeh, but where can one get Lignum Vitae these days. :)
On one of the forums I subscribe to, can't find it right now, some one recently posted a mallet head that they had turned from Lignum Vitae, they had reclaimed it from an old lawn bowling ball. :)
That is my point. You can't buy it new only reclaimed. I bet there is a bunch of Lignum Vitae on the USS Oklahoma at the bottom of Pearl Harbor. It was used back then for propeller shaft bearings.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Top
dynabase
Gold Member
Posts: 161
Joined: Sun May 26, 2013 1:06 am
Location: Post Falls, Idaho

Re: bandsaw guide block

Post by dynabase »

jsburger wrote:
JPG wrote:I like 'blocks' made from lignum vitae.
Yeh, but where can one get Lignum Vitae these days. :)
You can get it on eBay. I got curious and looked it up. Tons of it on eBay.

Michael
Top
Post Reply

Return to “Maintenance and Repair”