Long term blade tension 'can' conceivably cause the upper wheel shaft/mount to deform from original position(cant).
I say 'can' since that is an observation rather than something measured.
Insufficient cant is all too common. I think there are many causes including attempts to make the blade track in the middle of the upper wheel which is NOT crowned(a crown is the reason center tracking is a goal of almost all bandsaws).
Any one hear a discussion about tracking/slipping off the lower wheel(the one driving the blade)?
Gotta say before entering, THE SS BANDSAW DOES NOT TRACK AT THE CENTER OF THE WHEELS!
It tracks about 1/4" from the back edge of the wheel(always regardless of blade size!).
Bandsaw blade slippage
Moderators: HopefulSSer, admin
- JPG
- Platinum Member
- Posts: 34643
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Bandsaw blade slippage
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Bandsaw blade slippage
When your finished with the bandsaw, do you release the blade tension?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob