Versions of these business card holders are all over the internet. I had a scrap of wood leftover from my platform rocker bases that I thought would work well. Basically similar construction to a band saw box. Band saw off the faces. Then hollow out the middle leaving three narrow edges and glue the faces back on.
In this case I also used my new Shopsmith oscillating drum sander (with a narrow diameter drum) to sand in the thumb/finger grab. That’s a very good tool. I know people have been using oscillating spindle sanders for a while. Not sure why I held out. Definitely does a better job than a non-oscillating drum.
I’m still not sure what kind of wood this is but probably walnut. The finish is just wax. The case holds about 15 standard business cards.
I’ve got a couple of other designs in my mind’s eye so there may be a version 2 or 3 of this project. I think they will make good holiday gifts. This one took me about three hours start to finish. I think having done one I could do it faster next time.
Scrap Wood Business Card Case
Moderators: HopefulSSer, admin
Scrap Wood Business Card Case
Last edited by algale on Sun Nov 10, 2019 4:20 pm, edited 4 times in total.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Scrap Wood Business Card Case
Nice! I like it...
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: Scrap Wood Business Card Case
Definitely a great idea, and great results!
Chris
Chris
- BuckeyeDennis
- Platinum Member
- Posts: 3697
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Scrap Wood Business Card Case
That’s a darned good-looking card holder, Al. And it strikes me as the type of project where making several wouldn’t take a whole lot longer than just one. What kind of wood do you have in mind for Xmas presents?
- JPG
- Platinum Member
- Posts: 34643
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Scrap Wood Business Card Case
I think contrasting woods for the three 'layers' would be 'neat'!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Scrap Wood Business Card Case
Yes, Dennis, making more than one at a time makes sense now that I have worked out the dimensions and order of operations. I want to pick up some CA glue, however. I used hot hide glue for these and even though it sets pretty quickly, it doesn't set as quickly as CA. In addition, hot hide is a little messy to use while handling such small parts.
I've got more walnut scraps, more of the mystery wood that went into the rocker bases. I've also got some maple and mahogany scraps too. Thinking the next one might even be two-toned [as JPG suggest]. Plus I'm working on a design for one that has a top closure.
I've got a business trip this coming week and I am looking forward to taking the prototype with me to dish out a few cards.
I've got more walnut scraps, more of the mystery wood that went into the rocker bases. I've also got some maple and mahogany scraps too. Thinking the next one might even be two-toned [as JPG suggest]. Plus I'm working on a design for one that has a top closure.
I've got a business trip this coming week and I am looking forward to taking the prototype with me to dish out a few cards.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
- rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: Scrap Wood Business Card Case
Really really nice!
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
-
- Platinum Member
- Posts: 1564
- Joined: Wed Feb 05, 2014 11:57 am
- Location: Las Vegas NV
Re: Scrap Wood Business Card Case
Very cool. Thanks for the idea !
Paul
Paul