Hi all,
Does anyone have or know someone who might have a file to create the circular insert for the bandsaw? If not, I'll create it and post it here for all to use.
thx
Ashkan
Bandsaw circular insert 3D print file
Moderators: HopefulSSer, admin
Bandsaw circular insert 3D print file
1960's vintage Shopsmith Mark VII with Bandsaw, Belt Sander, Jointer
Re: Bandsaw circular insert 3D print file
Hi all, attached is a photo of the 3D printed part. It's a snug fit so it won't jiggle around. I've also tried to share this through my Google drive so let me know if it works:
https://drive.google.com/file/d/1fjnfBf ... sp=sharing
if it does not, message me directly and I'll email it to you no problem. If you want/need this but don't have a 3D printer, I am happy to print it and mail it to you as well if you'll cover shipping + materials.
One note: the diameter is 63.5mm cuz I wanted a tight snug fit. I'd suggest backing off to 63mm if you want it to have some play
https://drive.google.com/file/d/1fjnfBf ... sp=sharing
if it does not, message me directly and I'll email it to you no problem. If you want/need this but don't have a 3D printer, I am happy to print it and mail it to you as well if you'll cover shipping + materials.
One note: the diameter is 63.5mm cuz I wanted a tight snug fit. I'd suggest backing off to 63mm if you want it to have some play
- Attachments
-
- Bandsaw insert
- SSbandsawinsert.jpg (148.82 KiB) Viewed 37074 times
1960's vintage Shopsmith Mark VII with Bandsaw, Belt Sander, Jointer
Re: Bandsaw circular insert 3D print file
For zero clearance inserts I have purchased the Delta saw ones from here:
https://www.ptreeusa.com/bandsaw_inserts.html
3 for $8
Recently I spotted some here:
https://www.amazon.com/POWERTEC-71086-C ... C263FG68JE
They are 5 for $12.
Another place has these:
https://www.woodline.com/products/band- ... le-inserts
3 for $11
This one I can not say for sure will fit but aluminum and of course more expensive:
https://www.amazon.com/Table-Inserts-So ... B00AFJY5NY
The last one I got from shopsmith was on back order for a whole year so I had to branch out and find some replacement in the mean time. Yes a whole year!
Ed
https://www.ptreeusa.com/bandsaw_inserts.html
3 for $8
Recently I spotted some here:
https://www.amazon.com/POWERTEC-71086-C ... C263FG68JE
They are 5 for $12.
Another place has these:
https://www.woodline.com/products/band- ... le-inserts
3 for $11
This one I can not say for sure will fit but aluminum and of course more expensive:
https://www.amazon.com/Table-Inserts-So ... B00AFJY5NY
The last one I got from shopsmith was on back order for a whole year so I had to branch out and find some replacement in the mean time. Yes a whole year!
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
-
- Gold Member
- Posts: 109
- Joined: Sat Sep 12, 2020 9:41 pm
- Location: Spring Creek, NV (by Elko) Northern Nevada
Re: Bandsaw circular insert 3D print file
Ash1562:
You're about 2 weeks too late for me.
I just purchase 3 3d inserts from someone on eBay.
They were white, I like your green one.
You're about 2 weeks too late for me.
I just purchase 3 3d inserts from someone on eBay.
They were white, I like your green one.
Re: Bandsaw circular insert 3D print file
oh man what a bummer! I was waiting almost 10 days for new filament to print this out...the winter storms last week did not help shipping!
Well, should you need another or anything else 3D printed for your SS, let me know! Happy to help
Well, should you need another or anything else 3D printed for your SS, let me know! Happy to help
1960's vintage Shopsmith Mark VII with Bandsaw, Belt Sander, Jointer
Re: Bandsaw circular insert 3D print file
Does anyone have a file for printing an insert for the Shopsmith bandsaw aluminum table? our local library has a Flash Forge 3D printer that I have used to print an insert for the Shopsmith jigsaw. I was very pleased with the results.
- chapmanruss
- Platinum Member
- Posts: 3500
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Bandsaw circular insert 3D print file
Lodgepole,
Are you looking to do something different for the Bandsaw Table Insert for Aluminum Table? It is different from the Insert for the Cast Iron Table in how it is held in. The Insert for the Cast Iron Table is a friction fit whereas the Insert for the Aluminum Table has clips to hold it in place. Both Inserts are still available new from Shopsmith and the Insert for the Aluminum Table is part number 516173. Without the clips and being a "drop in" Insert what would keep it in place?
Are you looking to do something different for the Bandsaw Table Insert for Aluminum Table? It is different from the Insert for the Cast Iron Table in how it is held in. The Insert for the Cast Iron Table is a friction fit whereas the Insert for the Aluminum Table has clips to hold it in place. Both Inserts are still available new from Shopsmith and the Insert for the Aluminum Table is part number 516173. Without the clips and being a "drop in" Insert what would keep it in place?
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Bandsaw circular insert 3D print file
Good points. I was just on a role with using a 3 D printer.