Mark VII a start and a long ways to go..
Moderators: HopefulSSer, admin
Re: Mark VII a start and a long ways to go..
JPG will check tomorrow
Mike- I can push out a bit, maybe 1/8” no problem 1/4” might be a bit much.
The rest of setup looks normal?
Thank you both it’s a slow crawl to finish line
Mike- I can push out a bit, maybe 1/8” no problem 1/4” might be a bit much.
The rest of setup looks normal?
Thank you both it’s a slow crawl to finish line
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
JPG- you were right, I pushed collar back, didn’t get 1.125 but got it pretty close. Not sure how you could see that, many thanks.
Mike- you were right as well and I thank you as well. Pic below shows the workable solution.
I’m guessing no dado with this set up though I may make an insert.
Mike- you were right as well and I thank you as well. Pic below shows the workable solution.
I’m guessing no dado with this set up though I may make an insert.
- Attachments
-
- IMG_2613.jpeg (282.05 KiB) Viewed 3173 times
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
Are you sure you don't have a 510 arbor there. The MK-VII should use a 500 arbor which is shorter. The dado arbor is completely different.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- JPG
- Platinum Member
- Posts: 34655
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mark VII a start and a long ways to go..
He has a M5/MVII /500 arbor.
Dado arbor = new ball game!
Dado arbor = new ball game!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Mark VII a start and a long ways to go..
Thanks. Not sure on arbor but if I find a shorter one will use it.
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
This is the end….my only friend…. Well a little Morrison always puts me in a good mood. I claim this VII did and done. I’m sure I will have some fine tuning and questions. Want to thank everyone for their support.
Without this forum is would still be just a bucket of rust.
A few pics
Without this forum is would still be just a bucket of rust.
A few pics
- Attachments
-
- IMG_0097.jpeg (723.55 KiB) Viewed 3140 times
-
- IMG_2622.jpeg (684.59 KiB) Viewed 3140 times
-
- IMG_2621.jpeg (568.35 KiB) Viewed 3140 times
-
- IMG_2620.jpeg (736.89 KiB) Viewed 3140 times
-
- IMG_2619.jpeg (724.26 KiB) Viewed 3140 times
-
- IMG_2618.jpeg (680.63 KiB) Viewed 3140 times
-
- IMG_2617.jpeg (695.25 KiB) Viewed 3140 times
I may be old but I’m slow
https://www.schmuckatellico.com/
https://scshiftknob.com
https://www.schmuckatellico.com/
https://scshiftknob.com
Re: Mark VII a start and a long ways to go..
Looks top notch Mike.
I'd be almost afraid to use something that clean and shiny.
I'd be almost afraid to use something that clean and shiny.
SS Mark VII(sn 405025), SSband saw, SS 4" jointer, Older SS Mark V w/DC treadmill motor,
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
Re: Mark VII a start and a long ways to go..
Yep, gotta agree, amazing results. Give yourself a good pat on the back. Job well done.
Mike
Mike
ShopSmith Mark VII (406982), with Band Saw, Jig Saw, Belt Sander, and Jointer
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
Re: Mark VII a start and a long ways to go..
Wow! Absolutely beautiful. Thank you sharing.
- JPG
- Platinum Member
- Posts: 34655
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mark VII a start and a long ways to go..
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange