phone  (937) 890-5197

Shopsmith Forums

%nbsp;

10 posts • Page 1 of 1

Shopsmith images

#262816 by Spooner » Mon Sep 16, 2019 4:00 pm

Does and anyone know or has anyone seen clipart or images of a shopsmith from the top looking down? Or even dimensions of the 520 table system and its orientation across the saw would be good. I could build that up in cad. I'm putting together a shop layout drawing and I want a symbol for a shopsmith. Anyone have any thoughts or ideas?

Post a reply  Reply with quote 

Re: Shopsmith images

#262819 by dusty » Mon Sep 16, 2019 5:02 pm

Spooner wrote:Does and anyone know or has anyone seen clipart or images of a shopsmith from the top looking down? Or even dimensions of the 520 table system and its orientation across the saw would be good. I could build that up in cad. I'm putting together a shop layout drawing and I want a symbol for a shopsmith. Anyone have any thoughts or ideas?


I don't know exactly what you need. Does this come anywhere near what you are looking for.

Main Table and Two Floating Tables with Dial Indicator.png
Main Table and Two Floating Tables with Dial Indicator.png (87.73 KiB) Viewed 6155 times

---

"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.

Post a reply  Reply with quote 

Re: Shopsmith images

#262829 by john_001 » Mon Sep 16, 2019 7:40 pm

I'm not sure what you're looking for. Sketchup's "3d Warehouse" has a Mark V Model 500 (complete with belt sander) in a 3D image that can be rotated any way you like. But it's not a photograph - it's an artist's rendition of one.

Post a reply  Reply with quote 

Re: Shopsmith images

#262849 by Spooner » Tue Sep 17, 2019 9:35 am

That's real close Dusty but I need the full (what is it?) 6' length of top? I'm looking for a Top View of the saw. This is my shop layout I'm working on. With my current tools. But I want to see where I could place all the SS tools and see how much space I can save.

Attachments

My Shop Layout 1.png
My Shop Layout 1.png (118.82 KiB) Viewed 6075 times

Post a reply  Reply with quote 

Re: Shopsmith images

#262852 by dusty » Tue Sep 17, 2019 1:39 pm

Spooner wrote:That's real close Dusty but I need the full (what is it?) 6' length of top? I'm looking for a Top View of the saw. This is my shop layout I'm working on. With my current tools. But I want to see where I could place all the SS tools and see how much space I can save.


I don't have anything that compares to your drawing but I may have Sketchups that will show the amount of space you would have to dedicate. It is not right at my finger tips but I will pull out what I have and post here.

I am a very poor file clerk but I collect everything. I will certainly be able to show you what the footprint is.

While in the planning stages you must consider work space not just footprint. Think "ripping a 12' long board" or cross cutting it into 12" pieces.

---

"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.

Post a reply  Reply with quote 

Re: Shopsmith images

#262854 by Spooner » Tue Sep 17, 2019 2:22 pm

dusty wrote:I don't have anything that compares to your drawing but I may have Sketchups that will show the amount of space you would have to dedicate. It is not right at my finger tips but I will pull out what I have and post here.

I am a very poor file clerk but I collect everything. I will certainly be able to show you what the footprint is.

While in the planning stages you must consider work space not just footprint. Think "ripping a 12' long board" or cross cutting it into 12" pieces.


I'll take anything ya got Dusty. Thanks for sharing. If anyone wants a DXF of the drawings I'm using just speak up. I'd love to share.

I have a 25' x 30' concrete driveway I can use for the big stuff. Just roll the SS out there and start cutting. Plus I pull the jeep out and that opens things up too.

Post a reply  Reply with quote 

Re: Shopsmith images

#262936 by Spooner » Thu Sep 19, 2019 1:56 pm

Here's kind of what I was looking for.

Attachments

E2graphic.gif
E2graphic.gif (1.86 KiB) Viewed 5903 times

Post a reply  Reply with quote 

Re: Shopsmith images

#262937 by Spooner » Thu Sep 19, 2019 1:58 pm

Here's what I came up with. Any thoughts? Does that look close?

Attachments

SS Mark 7.png
SS Mark 7.png (68.01 KiB) Viewed 5902 times

Post a reply  Reply with quote 

Re: Shopsmith images

#262941 by dusty » Thu Sep 19, 2019 3:36 pm

Spooner wrote:Here's what I came up with. Any thoughts? Does that look close?


It appears to be proportionally correct. I measure the overall length to be 61" with the two end tables mounted. The main table measures 17"x22".

Shopsmith Layout with Cntr Line, Spooner 1.png
Shopsmith Layout with Cntr Line, Spooner 1.png (60.15 KiB) Viewed 5890 times

---

"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.

Post a reply  Reply with quote 

Re: Shopsmith images

#262942 by Spooner » Thu Sep 19, 2019 3:42 pm

dusty wrote:
Spooner wrote:Here's what I came up with. Any thoughts? Does that look close?


It appears to be proportionally correct. I measure the overall length to be 61" with the two end tables mounted. The main table measures 17"x22".

Shopsmith Layout with Cntr Line, Spooner 1.png


And these dimensions are coming from a 510 or 520? I assume the 17"X22" is without the fence rails?

Post a reply  Reply with quote 

Who is online

Users browsing this forum: Google [Bot] and 36 guests

Board indexDelete all board cookies

Welcome to Shopsmith. Please fill in this form and we'll send you more information and special offers for the Shopsmith MARK 7 and other woodworking topics.

Subscribe to our mailing list

* indicates required