Mark V switch

wrmnfzy · Post by **wrmnfzy** » Sun Apr 29, 2012 8:04 pm

While checking a problem on my power stock the wiring became dislodged from the switch. I have a white and blue with same female ends and a blk and white with the same type ends. I ckd my manuals and can't find which go where any suggestions. I do have photos, but I'm new and don't know if they can be attached. Any help would be appreciated.

JPG · Post by **JPG** » Sun Apr 29, 2012 8:27 pm

wrmnfzy wrote:While checking a problem on my power stock the wiring became dislodged from the switch. I have a white and blue with same female ends and a blk and white with the same type ends. I ckd my manuals and can't find which go where any suggestions. I do have photos, but I'm new and don't know if they can be attached. Any help would be appreciated.

They slipped off, and will slip back on.

a white on each terminal on one side.

A black at one terminal on the other side, and a blue on the remaining terminal on that other side.

wrmnfzy · Post by **wrmnfzy** » Sun Apr 29, 2012 10:37 pm

Thanks, it worked.

robinson46176 · Post by **robinson46176** » Mon Apr 30, 2012 4:34 am

wrmnfzy wrote:Thanks, it worked.

Now take an "after" picture and drop it in your Shopsmith file.

.

wrmnfzy · Post by **wrmnfzy** » Tue May 01, 2012 5:18 pm

10-4, did that.