I assume by blade choice you mean a 9" diameter blade. Please explain how the diameter of the blade relates to the length of the arbor.StevenAyres wrote: ↑Sat May 08, 2021 7:20 pm An idea that hasn't yet been explored in this thread is blade choice for the Mark VII. To use the original system (guard as pictured below, carriage lock aligning the blade to the table slots), you'll definitely prefer to use the original short arbors and 9" blades by Magna. Those blades come available frequently on Ebay and such for not much money, they're of high quality for their time and sharpen up well. I haven't seen any carbides, but having the standard blades sharpened is inexpensive too.
Shorter Arbor
Moderators: HopefulSSer, admin
Re: Shorter Arbor
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
-
- Gold Member
- Posts: 84
- Joined: Sun Apr 21, 2019 11:21 am
- Location: Prescott AZ
Re: Shorter Arbor
OK, but that was not the point of the OP.StevenAyres wrote: ↑Sat May 08, 2021 7:43 pmThe blade diameter is more about the guard than the arbor per se. The original VII guard won't take a 10" blade, at least not comfortably.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- chapmanruss
- Platinum Member
- Posts: 3532
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Shorter Arbor
Mike,
The Sawdust Chute/Lower Blade Guard P/N 505705 for the Mark VII that Steve is talking about is the same one I showed a picture of (on it's box) in my previous post. Since it is not the one you have there is no worries about using 10" Saw Blades. The 505628 Lower Saw Blade Guard you have was made for use with 10" blades.
The Sawdust Chute/Lower Blade Guard P/N 505705 for the Mark VII that Steve is talking about is the same one I showed a picture of (on it's box) in my previous post. Since it is not the one you have there is no worries about using 10" Saw Blades. The 505628 Lower Saw Blade Guard you have was made for use with 10" blades.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Shorter Arbor
Perfect, I think I am all set.chapmanruss wrote: ↑Sun May 09, 2021 1:34 pm Mike,
The Sawdust Chute/Lower Blade Guard P/N 505705 for the Mark VII that Steve is talking about is the same one I showed a picture of (on it's box) in my previous post. Since it is not the one you have there is no worries about using 10" Saw Blades. The 505628 Lower Saw Blade Guard you have was made for use with 10" blades.
ShopSmith Mark VII (406982), with Band Saw, Jig Saw, Belt Sander, and Jointer
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper