Heads Up - Bargain 'available'
Moderators: HopefulSSer, admin
- rlkeeney
- Platinum Member
- Posts: 720
- Joined: Fri Nov 14, 2008 5:53 am
- Location: Tallahassee FL
- Contact:
520 for $495
--
Robert Keeney
Tallahassee Florida
#odinstoyfactory
Robert Keeney
Tallahassee Florida
#odinstoyfactory
I was getting ready to get the phone then I saw it was in NC. Why does it say ( Shopsmith Mark V - $495 (Denver) I was going to be all over it, if it was Denver, Co. It would have be worth the 8 hr drive, but not the 17 hr to NC.
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
Another one followed me home
Well.... I guess I'm weak
[ATTACH]26021[/ATTACH]
[ATTACH]26022[/ATTACH]
This was odd
[ATTACH]26023[/ATTACH]
Not pictured was all the usual books
Never opened Brad point bits, Lathe tools, & tool rest.
As I drove away I felt sorry for the guy that sold this to me....
He had no Shopsmith and I had four....
Then I thought just maybe he was the lucky one...
Immune to this disease that afflicts so many....
Does anyone know if the gold tone is thin coating or is it solid?
Will it buff away?
[ATTACH]26021[/ATTACH]
[ATTACH]26022[/ATTACH]
This was odd
[ATTACH]26023[/ATTACH]
Not pictured was all the usual books
Never opened Brad point bits, Lathe tools, & tool rest.
As I drove away I felt sorry for the guy that sold this to me....
He had no Shopsmith and I had four....
Then I thought just maybe he was the lucky one...
Immune to this disease that afflicts so many....
Does anyone know if the gold tone is thin coating or is it solid?
Will it buff away?
- Attachments
-
- ss50-1.jpg (357.31 KiB) Viewed 71885 times
-
- ss50-2.jpg (364.76 KiB) Viewed 71883 times
-
- ss50-3.jpg (242.29 KiB) Viewed 71876 times
Bruce
I didn't know what a Shopsmith was...
Three days later I owned one...
One week later I was rebuilding one...
Four months later I owned two....
Ok Ok, I'm up to four now...
I didn't know what a Shopsmith was...
Three days later I owned one...
One week later I was rebuilding one...
Four months later I owned two....
Ok Ok, I'm up to four now...
- BuckeyeDennis
- Platinum Member
- Posts: 3700
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
I can't see anything that needs buffing!lightnin wrote:Well.... I guess I'm weak
[ATTACH]26021[/ATTACH]
[ATTACH]26022[/ATTACH]
This was odd
[ATTACH]26023[/ATTACH]
Not pictured was all the usual books
Never opened Brad point bits, Lathe tools, & tool rest.
As I drove away I felt sorry for the guy that sold this to me....
He had no Shopsmith and I had four....
Then I thought just maybe he was the lucky one...
Immune to this disease that afflicts so many....
Does anyone know if the gold tone is thin coating or is it solid?
Will it buff away?
Did ya drive all the way to Charlotte NC for that? Or keep a different bargain all to yourself?
[quote="BuckeyeDennis"]I can't see anything that needs buffing!
Did ya drive all the way to Charlotte NC for that? Or keep a different bargain all to yourself? ]
It was local.. If it would work I'd like to see one all buffed and shiny...
Did ya drive all the way to Charlotte NC for that? Or keep a different bargain all to yourself? ]
It was local.. If it would work I'd like to see one all buffed and shiny...
Bruce
I didn't know what a Shopsmith was...
Three days later I owned one...
One week later I was rebuilding one...
Four months later I owned two....
Ok Ok, I'm up to four now...
I didn't know what a Shopsmith was...
Three days later I owned one...
One week later I was rebuilding one...
Four months later I owned two....
Ok Ok, I'm up to four now...
Wilton 1/2 Pipe Clamp 63111
http://www.ebay.com/itm/Wilton-1-2-Pipe ... 4cecbe1140
$4.50 each. Shipping is $5.50 for the first, and $2 for each additional.
This seems like a great deal. But I wanted your opinion before grabbing a bunch of these.
$4.50 each. Shipping is $5.50 for the first, and $2 for each additional.
This seems like a great deal. But I wanted your opinion before grabbing a bunch of these.
Hello from Somerset in the beautiful Pennsylvania Laurel Highlands.
Mark 7, Mark VII, Mark V 520, Mark V 510 x 2, Mark V 500
SPT's - Band Saw, Jig Saw, Belt Sander, Jointer, strip sander, Oscillating Sander, Speed Increaser
SS Freestanding - Pro Planer, Scroll Saw, Overarm Pin Router, Power Station, DC3000 x 2
Made for SS - Incra iBox, Ring Master
"Honest dear, I can quit any time I want."
Mark 7, Mark VII, Mark V 520, Mark V 510 x 2, Mark V 500
SPT's - Band Saw, Jig Saw, Belt Sander, Jointer, strip sander, Oscillating Sander, Speed Increaser
SS Freestanding - Pro Planer, Scroll Saw, Overarm Pin Router, Power Station, DC3000 x 2
Made for SS - Incra iBox, Ring Master
"Honest dear, I can quit any time I want."
The only comment I have is that they are half-inch, knot 3/4".
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.