MARK V 500 to MARK 7 Pro Fence & Table Upgrade PART #555985

Move Up Your MARK V 500 to The MARK 7 Pro Fence and Table System and Do Everything the Professional Do!

$1,639.00

-
+

-

(0 Customer Reviews)

Shopsmith’s Pro Fence & Table System Upgrade is the best way for You to equip Your older MARK V 500 with the latest in features and capabilities You would experience with the MARK 7 Pro Fence and Table System. Armed with this state-of-the-art fence and table system, you’ll be able to tackle all of your projects with improved convenience, precision and safety.

LEARN MORE
The Pro Fence and Table System Upgrade Kit Includes:
  • Larger Table with big 17-1/2″ x 22″ work surface. More support for ripping 4′ x 8′ plywood sheets and crosscutting even the longest boards.
  • Pro Fence is 24-1/2″ long by 2-1/2″ thick with a double T-slot track on the top surface plus another T-slot on each side for attaching accessories, jigs and fixtures. Two levers lock it rigidly to the front and rear of the main or extension table with a quick flip. It also includes a wider fence straddler.
  • Wider Tie Bar with dual tilt locks at the front and rear of the table. The widened tube stance for dust collection and gives added stability.
  • New Table Carriage with quarter-turn locks. Hand wheel and lock move the table up and down – then secure it where you want it.
  • Direct-Reading Rip Fence Scales let you read and instantly set the width of rip cuts up to 38-1/2″ wide. Includes two interchangeable stainless steel scales that are graduated in both 1/16″ and 1/32″ increments.
  • (2) Floating Extension Tables slide on connecting tubes and lock any-where between the main table and the end extension table.
  • (4) 27″ Connecting Tubes slip through the rails and tie the system together with locking knobs.Four 27″ Connecting Tubes slip through the rails and tie the system together with locking knobs.
  • (2) Telescoping Legs give added support in the middle or at the ends of the connecting tubes. A quick twist locks their height.
  • See-Through Upper Saw Guard with etched-in depth-of-cut indicators, European-style riving knife and anti-kickback device.
  • Lower Saw Guard, updated to accommodate Shopsmith’s 12″ sanding disc. Includes 2-1/2″ diameter dust collection port.
  • Two-position Lathe Tool Rest Arm with lever-style adjustment screws
  • Anti-rotation Tool Rest Post
  • Saw Table Insert
  • Steel Miter Gauge Bar with T-slot washer
  • Larger Extension Table Top (does not include vertical mounting tubes)
  • 12″ Steel Sanding Disc Hub (Hub Only – Steel Sanding Discs Sold Separately)
  • 1-1/4″ diameter saw arbor
  • All required fittings and hardware
  • Instruction Manual, fully describing alignment, maintenance, safety, tips and techniques
  • Special Alignment Set-Up Gauge
Note: Due to the increased size of the Pro Fence System work table and how various accessories connect to it, Some earlier MARK V 500 accessories may not fit the pro fence upgrade. These include (but are not limited to) all table inserts, front table extension, rip fence, mortising hold-downs and some saw arbors.
LEARN MORE

The Can't Miss Details

Shopsmith's Pro Fence & Table System Upgrade is the best way for You to equip Your older MARK V 500 with the latest in features and capabilities You would experience with the MARK 7 Pro Fence and Table System. Armed with this state-of-the-art fence and table system, you'll be able to tackle all of your projects with improved convenience, precision and safety.

Your Upgrade starts with an expanded table system that includes a larger worktable and extension table with two floating support tables and a pair of telescoping support legs. Put it all together and you'll have over eight feet of table width for crosscutting even the longest boards!

Plus, it adds the heavy-duty, factory-aligned Shopsmith Pro Fence with four T-slots (two on the top and one on each face for attaching jigs & fixtures).

The Pro Fence and Table System Upgrade Kit Includes:
• Larger Table with big 17-1/2" x 22" work surface. More support for ripping 4' x 8' plywood sheets and crosscutting even the longest boards.
• Pro Fence is 24-1/2" long by 2-1/2" thick with a double T-slot track on the top surface plus another T-slot on each side for attaching accessories, jigs and fixtures. Two levers lock it rigidly to the front and rear of the main or extension table with a quick flip. Also includes a wider fence straddler.
• Wider Tie Bar with dual tilt locks at the front and rear of the table. The widened tube stance for dust collection and gives added stability.
• New Table Carriage with quarter-turn locks. Hand wheel and lock move the table up and down - then secure it where you want it.
• Direct-Reading Rip Fence Scales let you read and instantly set the width of rip cuts up to 38-1/2" wide. Includes two interchangeable stainless steel scales that are graduated in both 1/16" and 1/32" increments.
• Two Floating Extension Tables slide on connecting tubes and lock any-where between the main table and the end extension table.
• Four 27" Connecting Tubes slip through the rails and tie the system together with locking knobs.Four 27" Connecting Tubes slip through the rails and tie the system together with locking knobs.
• Two Telescoping Legs give added support in the middle or at the ends of the connecting tubes. A quick twist locks their height.
• See-Through Upper Saw Guard with etched-in depth-of-cut indicators, European-style riving knife and anti-kickback device.
• Lower Saw Guard, updated to accommodate Shopsmith's 12" sanding disc. Includes 2-1/2" diameter dust collection port.

Plus You'll also Get:
• Two-position Lathe Tool Rest Arm with lever-style adjustment screws
• Anti-rotation Tool Rest Post
• Saw Table Insert
• Steel Miter Gauge Bar with T-slot washer
• Larger Extension Table Top (does not include vertical mounting tubes)
• New 12" Steel Sanding Disc Hub (Hub Only - Steel Sanding Discs Sold Separately)
• New 1-1/4" diameter saw arbor
• All required fittings and hardware
• Instruction Manual, fully describing alignment, maintenance, safety, tips and techniques
• Special Alignment Set-Up Gauge

Note: Due to the increased size of the Pro Fence System work table and how various accessories connect to it, Some earlier MARK V 500 accessories may not fit the Pro Fence Upgrade. These include (but are not limited to) all table inserts, front table extension, rip fence, mortising hold-downs and some saw arbors.

Increase Your MARK s Outboard Support When Ripping Large Panels Or Cross-Cutting Long Boards by Adding 5-Foot Connector Tubes

Just slip these extra-long tubes into the rails of your MARK ’s (for All MARKs except MARK V 500 unless Upgraded) main table or extension table to get all the added support you need for sawing, drilling, sanding, shaping or performing virtually any operation with extra large or long workpieces. Your existing telescoping legs and floating extension tables also work with these tubes.

Note: Not compatible with Model 500 Mark Vs unless it has been Upgraded.
Part NumberNameSpecifications
555985MARK V 500 to MARK 7 Pro Fence & Table UpgradeThe Pro Fence and Table System Upgrade Kit Includes:
• Larger Table with big 17-1/2" x 22" work surface. More support for ripping 4' x 8' plywood sheets and crosscutting even the longest boards.
• Pro Fence is 24-1/2" long by 2-1/2" thick with a double T-slot track on the top surface plus another T-slot on each side for attaching accessories, jigs and fixtures. Two levers lock it rigidly to the front and rear of the main or extension table with a quick flip. It also includes a wider fence straddler.
• Wider Tie Bar with dual tilt locks at the front and rear of the table. The widened tube stance for dust collection and gives added stability.
• New Table Carriage with quarter-turn locks. Hand wheel and lock move the table up and down - then secure it where you want it.
• Direct-Reading Rip Fence Scales let you read and instantly set the width of rip cuts up to 38-1/2" wide. Includes two interchangeable stainless steel scales that are graduated in both 1/16" and 1/32" increments.
• (2) Floating Extension Tables slide on connecting tubes and lock any-where between the main table and the end extension table.
• (4) 27" Connecting Tubes slip through the rails and tie the system together with locking knobs.Four 27" Connecting Tubes slip through the rails and tie the system together with locking knobs.
• (2) Telescoping Legs give added support in the middle or at the ends of the connecting tubes. A quick twist locks their height.
• See-Through Upper Saw Guard with etched-in depth-of-cut indicators, European-style riving knife and anti-kickback device.
• Lower Saw Guard, updated to accommodate Shopsmith's 12" sanding disc. Includes 2-1/2" diameter dust collection port.
• Two-position Lathe Tool Rest Arm with lever-style adjustment screws
• Anti-rotation Tool Rest Post
• Saw Table Insert
• Steel Miter Gauge Bar with T-slot washer
• Larger Extension Table Top (does not include vertical mounting tubes)
• 12" Steel Sanding Disc Hub (Hub Only - Steel Sanding Discs Sold Separately)
• 1-1/4" diameter saw arbor
• All required fittings and hardware
• Instruction Manual, fully describing alignment, maintenance, safety, tips and techniques
• Special Alignment Set-Up Gauge

Note: Due to the increased size of the Pro Fence System work table and how various accessories connect to it, Some earlier MARK V 500 accessories may not fit the pro fence upgrade. These include (but are not limited to) all table inserts, front table extension, rip fence, mortising hold-downs and some saw arbors.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

warranty-sticker
SHOPSMITH LIMITED LIFETIME WARRANTY A Legacy Of Quality & Satisfaction Since 1953! Warranty applies ONLY to Original Shopsmith Purchaser. Purchaser is responsible for shipping costs from the outside the United States or from Alaska and Hawaii. View additional information about our warranty.
shipping-sticker
RETURNS & SHIPPING Use any product for a full 30 days. Make as many projects as you would like to be completely satisfied that the product gives the performance you expect. If by chance you are not satisfied, you can return the product within 30 days. No questions asked. View additional information about returns. $150 Freight Surcharge View additional shipping information.

Shopsmith Owner Testimonials

My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.

- Kent Bradshaw, Owner Since 1974

Let Us Build You a Shopsmith Today

With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.

NEED HELP OR WANT TO ORDER BY PHONE?
Call Shopsmith U.S-Based Customer Care 1-937-890-5197. Support hours are Monday-Friday from 8:30am to 4:30pm.
Email Customer Care at info@shopsmith.com.
MARK V 500 to MARK 7 Pro Fence & Table Upgrade 555985

$1,639.00Add to cart